01-18-2017, 08:48 AM
When starting the engine, the gear lever must be placed in the neutral position, the throttle handle in the 1/4 position; only in the driver's seat to start the engine
After the engine starts should be pre-�V -10 minutes, and observe the meter readings are normal. Release the handbrake, before the pedal should first step on the clutch pedal, should pay attention to the clutch to be completely separated, strictly prohibited half-closed when the file, loose clutch as slow as possible to reduce the gearbox transient impact. Or emergency pedal during operation, you must first press the main clutch plate to cut off the power, and then riding the automatic pedal, or easy to damage the brake, to lift, you should loose the automatic pedal, and then loose the main clutch pedal to resume driving. It is strictly forbidden to switch the speed on the ramp. Up and down the ramp when the application of a file speed, prohibit high-speed, downhill. During operation, if the clutch is found to slip, should immediately stop, and the separation of the main clutch, the clutch must be checked, adjusted and troubleshooting. Not increase the throttle, trying to high-speed large frequency to barely travel, or will burn the clutch plate<a href="http://doublesteelroller.com">Double Steel Roller - Road Machinery Equipment Manufacturers - Doan Machinery</a>
To change the direction of travel, first change the handle from the forward (backward) position to pull to the median, until the machine stopped after the handle to pull back (forward) position. Not a pull in place, so as to avoid sudden damage to the direction of the new line of moving parts; prohibited from the parking start directly with high-speed
concrete power float trowel
how to do maintenance on a sewing machine
all round lifting work lights marketing manufacturers
After the engine starts should be pre-�V -10 minutes, and observe the meter readings are normal. Release the handbrake, before the pedal should first step on the clutch pedal, should pay attention to the clutch to be completely separated, strictly prohibited half-closed when the file, loose clutch as slow as possible to reduce the gearbox transient impact. Or emergency pedal during operation, you must first press the main clutch plate to cut off the power, and then riding the automatic pedal, or easy to damage the brake, to lift, you should loose the automatic pedal, and then loose the main clutch pedal to resume driving. It is strictly forbidden to switch the speed on the ramp. Up and down the ramp when the application of a file speed, prohibit high-speed, downhill. During operation, if the clutch is found to slip, should immediately stop, and the separation of the main clutch, the clutch must be checked, adjusted and troubleshooting. Not increase the throttle, trying to high-speed large frequency to barely travel, or will burn the clutch plate<a href="http://doublesteelroller.com">Double Steel Roller - Road Machinery Equipment Manufacturers - Doan Machinery</a>
To change the direction of travel, first change the handle from the forward (backward) position to pull to the median, until the machine stopped after the handle to pull back (forward) position. Not a pull in place, so as to avoid sudden damage to the direction of the new line of moving parts; prohibited from the parking start directly with high-speed
concrete power float trowel
how to do maintenance on a sewing machine
all round lifting work lights marketing manufacturers