05-04-2016, 02:54 PM
WPC board and MDF are two different materials.
First, the main component of plastic sheet is abandoned corners of wood flour, wood and wood residue, with good rigidity and toughness, can be nails, drilling, grinding, sawing, planing, paint and difficult to deformation, can prevent cracking function , it is the furniture industry, interior decoration industry, packaging industry, the travel industry and the future of interior wooden housing industry preferred green sheet, the sheet market will set off a new revolution.
MDF, also known as fiberboard, is a wood fiber or other plant fiber as raw material, applied urea-formaldehyde resin or other suitable adhesive made from man-made sheet. According to the different amount, divided into high-density board, MDF, low-density boards. MDF the soft impact resistance, but also easy to re-processing, in a foreign country is a good material for making furniture, but because the State standards on high-density several times lower than the international standard, so the use of MDF in our quality to be improved.
How to choose the two plates, depends on the specific needs or used in any place.
the article come from:
maybe you also like :
<a href="http://waterproofboards.com/plastic-board/5086.html "> producer wpc in europe</a>
<a href="http://waterproofboards.com/wholesale-deck/3023.html "> plastic composite panels sri lanka</a>
<a href="http://waterproofboards.com/cheap-plank/1923.html "> Korea Composite Floor Board Manufacture</a>
First, the main component of plastic sheet is abandoned corners of wood flour, wood and wood residue, with good rigidity and toughness, can be nails, drilling, grinding, sawing, planing, paint and difficult to deformation, can prevent cracking function , it is the furniture industry, interior decoration industry, packaging industry, the travel industry and the future of interior wooden housing industry preferred green sheet, the sheet market will set off a new revolution.
MDF, also known as fiberboard, is a wood fiber or other plant fiber as raw material, applied urea-formaldehyde resin or other suitable adhesive made from man-made sheet. According to the different amount, divided into high-density board, MDF, low-density boards. MDF the soft impact resistance, but also easy to re-processing, in a foreign country is a good material for making furniture, but because the State standards on high-density several times lower than the international standard, so the use of MDF in our quality to be improved.
How to choose the two plates, depends on the specific needs or used in any place.
the article come from:
maybe you also like :
<a href="http://waterproofboards.com/plastic-board/5086.html "> producer wpc in europe</a>
<a href="http://waterproofboards.com/wholesale-deck/3023.html "> plastic composite panels sri lanka</a>
<a href="http://waterproofboards.com/cheap-plank/1923.html "> Korea Composite Floor Board Manufacture</a>