03-23-2017, 12:15 PM
Product Description: This coating is asphalt-based waterproof coating, deck waterproofing layer is set in the concrete bridge deck and asphalt concrete pavement layer between the strengthening of cement concrete and asphalt concrete pavement layer between the combined force to improve the ability to promote the surface layer. The deck waterproofing layer is a special function layer that is different from the other static structures. This coating meets the technical standards JT / T535-2004, JC / T975-2005. Note: Before the construction should be full of brown brush brush infiltration, so that soft brushing smooth. Temperature below 0 �� or higher than 35 �� should not be construction (should avoid high temperature construction). Storage temperature 5 �� -35 �� is appropriate. Should be selected within 4 hours without rain and snow weather construction. The coating is not dry or un-paved asphalt concrete, to prevent trampling or car driving. Immediately after the construction tools rinse with water, for reuse. Before the construction film drying, due to wind, rain caused by coating surface contamination, should be scrubbed and then spray or brushing. Spray should first use water test spray, adjust the nozzle. Non-motorized lanes, sidewalks, central segregation lines; highway tunnels, toll stations, expressway deceleration zones; outdoor parking, ramps, shopping centers, parking lots, airports, Wharf; landscape road and other.
best road maintenance services
crack repair concrete floor
fill potholes in gravel driveway
farm equipment trader australia
best road maintenance services
crack repair concrete floor
fill potholes in gravel driveway
farm equipment trader australia